|
STL Export Parameters
AutoCAD
• Your design must be a three-dimensional solid object to output an STL
file.
• Make sure the model is in positive space
• Set Facetres to 10
• At the command prompt type STLOUT
• Select Objects
• Choose Y for Binary
• Choose Filename
Inventor
• Save Copy As
• Select STL
• Choose Options >Set to High
• Enter File Name
• Save
Pro Engineer
• File >Save a Copy
• Set type to STL
• Set chord height to 0. The field will be replaced by minimum
acceptable value.
• Set Angle Control to 1
• Choose File Name
• OK
Rhino
• File >Save As
• Select File Type >STL
• Enter a name for the STL file.
• Save
• Select Binary STL Files
SolidWorks
• File >Save As
• Set Save As Type to STL
• Options >Resolution >Fine >OK
• Save
Unigraphics
• File >Export >Rapid Prototyping
• Set Output type to Binary
• Set Triangle Tolerance to 0.0025
• Set Adjacency Tolerance to 0.12
• Set Auto Normal Gen to On
• Set Normal Display to Off
• Set Triangle Display to On
SolidEdge
• File >Save As
• Set Save As Type to STL
• Options
• Set Conversion Tolerance to 0.001in or 0.0254mm.
• Set Surface Plane Angle to 45.00
• Save
SolidDesigner
• File >External >Save STL
• Select Binary mode
• Select Part
• Enter 0.001mm for Max Deviation Distance
• Click OK
TERMS AND CONDITIONS |
CONTACT |
